Tag Archives: bead sprite

Progress on the Super Mario Maker WiiU Perler Wall

 

I should have been posting these weekly, or at least not have waited so long to post anything on the page, but better late than never.

Here’s what I’ve been up to the last few weeks.

star_fox_perler_mario_makerHere we have the Amiibo costumes of the crew and ship from StarFox.animal_crossing_perler_mario_maker A few of the Animal Crossing costumes. (I wonder what angry song K.K. slider is singing).dr_mario_yoshi_perler_mario_maker Dr. Mario, Kart Mario, and some Yarn Yoshis.princess_peach_bowser_pit_samus_perler Bowser Jr, Waluigi, Pit, Princess, Bowser, and Zero Suit Samus.dk_donkey_kong_little_mac_shyguy_perler Diddy and Donkey Kong, Little Mac, Shellcreeper, Sidestepper , and a Shyguy.chibi_robo_splatoon_perler_mario_maker Question mark block, Toad, Dr. Lobe, Fit Trainer, Chibi Robo, and a Squid from Splatoon.king_dedede_toon_link_perler_mario_maker Majohng tile, King Dedede, Foreman Spike, Pikmen, Toon Link, and Mr Game and Watch.enemies_mario_maker_perler And finally some various enemies. mario_maker_perler_wallI project I am about half done with the project, and started putting them up on the wall. =)

Super Mario Maker Bullet Bill, Hammer Bros, and Piranha Plants.

20151028_160944 20151028_161053

I’ve been continuing with more of the Super Mario Maker Perlers over the last few weeks. Next post will be a ton of the Amiibo costumes pieces, and then I will take a break and make some bigger stuff again. I only wish the big stuff was as easy to iron as these were!

More Super Mario Maker Amiibo Costume Perlers.

super_mario_maker_perlersuper_mario_maker_beadsprite

Here’s the latest batch of Super Mario Maker pieces for the big project: Mario from the original Mario Bros, Mega Man, and Maker Mario Amiibo costumes, and a Thwomp. The next set of these will be mostly set pieces and enemies. I’m glad that I found another game with this many sprites that I want to make. The plan is still to get the total count to around 150-200ish so I can cover most of an entire wall in my kids room; my 9 year old son really loves this game. =)

 

Super Mario Maker Perler Art.

super_mario_maker_perler (11) super_mario_maker_perler (3) super_mario_maker_perler (4)

My 9 year old absolutely loves the new WiiU game Super Mario Maker. For months before it came out, he obsessed about the details, and several times insisted that it was already out, and I should go and buy it RIGHT NOW! Alas, we had to wait until it was released to us mere mortals, and not play testers that have been posting unauthorized YouTube videos.

The game came with an interesting artbook in place of a traditional game manual that showcased some of the level creation ideas as well as new sprites they have added to the game, and of course, the latter inspired me to make the above beadsprites. You will be seeing a bunch more of them over the coming weeks/months, as I plan on having a large mural similar to my Final Fantasy wall. My favorite of this batch are the alternate koopa troopas, and for those of you asking what Pac-Man is doing there, yes, he is in the game. =)

My biggest Perler bead piece yet!

It’s been over a month since I have updated the blog here, and for good reason. This monstrosity is the result of taking a full bucket of 22k beads, separating them, and then making one single piece. There were 22,172 beads in total.

Here is the completed art. I wanted to make something with a simple repeating pattern that would be easy to put together, and Houndstooth is one of my favorite tessellating patterns. (shout out to whomever added Ricky from Trailer Park Boys to the Wikipedia entry).

perler_houndstooth (1)

I started by ordering the colors in ROYGBIV, and then alternating dark and light colors. I think I could have come up with a better color arrangement, but I didn’t want to pain over what the final finished product would be, but simply wanted to get it done.

Here are a few of the single boards I used to test and start it off.
perler_houndstooth (2)

I ran out of peg boards pretty quick, but fortunately, the local Joann’s had a sale going, so I was able to get everything I needed. The pattern quickly started to expand, and I was only able to estimate how big it would get.perler_houndstooth (3)

There were way more of some colors than others. Almost twice as many greys as there were yellows.

perler_houndstooth (4)

I toyed with the idea of having the borders being rough, but shifted to having a solid grey border to frame it.perler_houndstooth (5)

All the beads that remained were dumped back in the sorting dish, mixed back up, and placed around the border so that I could use all 22k beads.perler_houndstooth (6)

It’s ready to get taped up at this point. (I later added my signature “D” in the corner.perler_houndstooth (7)

It is all taped up and holes poked.perler_houndstooth (8)

Just starting the ironing at this point. I knew it was going to take several hours to complete. I started ironing it like a normal “smaller” piece, but quickly determined that I needed to turn up the heat and get it done quickly.perler_houndstooth (9)

Here is the first sign that things are going wrong. perler_houndstooth (10)

As the tape and the beads started heating up, there was expansion and warping. I tried to keep heavy books on these parts as I was ironing, but they kept popping up.perler_houndstooth (11)

The parchment paper usually stays flat on the beads when ironing, but this clearly wasn’t going to be the case for this one.perler_houndstooth (12)

After the principle ironing, you can see how the masking tape wrinkles and pulls on the beads.  With small scale stuff, this isn’t an issue. perler_houndstooth (13)

The tape came off easily enough. Most of it was in one big ball.perler_houndstooth (14)

Here are a few spots that came out ugly as it warped. From a distance, it’s not bad, but as an artist, I am hypercritical of my own work.perler_houndstooth (15) perler_houndstooth (16)

This whole project was quite the undertaking, but I knew the first time would be a challenge, and I would learn a lot from it. I plan on making at least 3 more big Perler bead pieces like this in the future, with different designs, and I am confident they will turn out much better.

20150512_164142

Piston Hurricane from Punch-Out!! arcade Perler

piston_hurricane_perler punch-out_piston_hurricaneI know I’ve said it in previous posts, but I really liked the Punch-Out!! arcade game. There was a coin-op arcade in my home town called “The Gold Mine” that had the first one that I had ever seen, and I was totally impressed that it had multiple screens (one above) with the characters portrait and stats.

Piston Hurricane was the second opponent in the game, and wasn’t that much tougher than Glass Joe was, but if you beat Mr. Dream, you could face a “smarter” version of him with blue instead of red gloves (same for Glass Joe). I had one bead fall over during the ironing process, but I was able to cut it out and repair. The trio of these guys looks super cool, now I just need to find a proper place to display them. =)

Krumm from Aaahh!!! Real Monsters for the SNES

krumm_aaahh_real_monsters-beadsprite krumm_aaahh_real_monsters-perler

I’ve been slow at updating the page, as I have just recently moved in to new house, and was busy with unpacking and cleaning, and a bunch of other stuff. It’s funny when you’ve gone a few months without really doing your hobby, and the joy of getting to do a bigger project.

I wanted to do something that is a little out of the ordinary for the next few sprites, and after literal hours of searching through game sprites online, I settled for a set from the game “Aaahh!!! Real Monsters” for the SNES/Genesis. This is Krumm in a frame of his “scary” animation. I have Ickys and Oblina coming up next, and I thing they will make for a cool piece.

The “flat” side of this beadsprite came out a little underdone in a few spots, but I always display “bead” side, so it’s not the biggest deal. I prefer to under-do it rather that over-do it. I really like the way it looks, and that I was able to use up some of my supply of plums, pinks, and neon yellows.

Super Mario Kart Winners!

20150707_125409 20150707_125453I’ve been super busy with moving into my new house, and haven’t had a ton of time to keep up with beading, but I am getting back into the groove. It was heartbreaking to take all the Perler art off the walls and box it up. The Final Fantasy wall was only up for 6 months before it was removed and boxed up, and now with the new place, I don’t know where to put it all. I’m thinking that I will build all new stuff for the walls in my house, and here is the first set!

Super Mario Kart came out the summer of 1992, when I was about to become a Senior in high school, so I missed it when it first came out ( I was busy with a summer job and partying ). I picked it up a few years later, though, and thoroughly enjoyed it.

I didn’t notice until after I was done that I made a mistake in Yoshi’s hand, so I might make another one and use a lighter shade of green to match the Luigi. All eight were made in the race winning pose with the exception of Donkey Kong, because he is always a loser. =)

 

Excitebike Perler fridge magnet set.

20150326_181904It’s not often that you see the background objects of videogames featured in art projects. I liked that the game Excitebike included things like cameramen and pit-crews in along the track. I really like the hard green borders they have, too.

I’ve been working on a ton of fridge-magnets for the reddit gift exchange, and for another project to finally sell some of my art for the people who keep on asking. =) I’ll be updating the page soon with a whole series on magnet stuff soon.

 

Ironing tutorial for Perler Beads Donkey Kong and King Koopa.

Here is part 2 of the Donkey Kong and King Koopa.  You check out the guide to prepare them for ironing with the Masking Tape Method here. Let me know what you think of these videos in the comments. =)